Skip to content
Request a Quote + Certification

Primary service

CMM Calibration and Repair

Request a quote matched to your machine and standard.

Request a quotation

Pricing is set out in writing and sent by email.

Calibration versus performance verification

Calibration establishes the relationship between a machine's indications and calibrated reference values, with a stated uncertainty. Most work ordered as "CMM calibration" is a performance verification against ISO 10360-2 or ASME B89.4.1, usually combined with geometric adjustment.

Where the controller allows it, the volumetric compensation map is updated as part of that adjustment. Some controllers are OEM-locked and the map cannot be touched in the field.

What a visit covers

Sequence runs from inspection through certificate issue, with as-found data captured at every stage before anything is adjusted.

  • 01

    Scale and reader head

    X, Y and Z scales are inspected and cleaned; reader heads are checked and adjusted to proper output.

  • 02

    Geometry

    Straightness, linearity and squareness are checked in the XY, ZX and ZY planes using laser interferometry or multilateration.

  • 03

    Length measurement error

    Five calibrated lengths, three repeats, seven positions — 105 measurements against E0,MPE per ISO 10360-2.

  • 04

    Probing error

    PFTU is tested on a separate calibrated sphere per ISO 10360-5, distinct from the probe qualification reference sphere.

Order of operations

  • 01

    Inspect

    Scales, reader heads, air bearings and airlines are checked for condition before any test runs.

  • 02

    Test as-found

    Geometry, length measurement error and probing error are recorded before adjustment.

  • 03

    Adjust

    Geometric correction and, where the controller allows it, compensation map updates are applied.

  • 04

    Verify as-left

    Tests are repeated and the certificate is issued with before-and-after results where adjustment occurred.

Why Louisville CMM Calibration and Repair

  • 01

    Frame-matched standard

    Bridge, portable-arm and multisensor machines are tested under the ISO 10360 part that applies to that configuration.

  • 02

    Repair and verification together

    Probe, scale, air bearing and drive repairs are followed by re-verification before the machine returns to service.

  • 03

    Environmental conditions recorded

    Temperature and gradient at time of test are stated, since reverification conditions are set by the user.

Coverage across Kentucky and the Greater Midwest

On-site scheduling is confirmed by metro and travel distance at the time of quote; ship-in service is available outside the stated radius.

Discuss CMM Calibration and Repair Requirements

Send machine make, model and the standard the certificate must cite.

Pricing is set out in writing and sent by email.
Request a Quote + CertificationEmail us